All Platforms Package Maintenance Levels - Agent 7.8.x
This page identifies the changes made in all Universal Agent 7.8.x maintenance releases, including the initial release, for all supported platforms.
Each change identifies the platform(s) for which it was made.
For a list of all changes in a release - all platforms, specific components - see Component Maintenance Levels.
Install changes refer to changes to the programs, scripts, or supporting files used to install the package. There are no changes to the actual product components.
Release 7.8.3.3 - March 10, 2026
Change Id | Platform | Component | Description |
|---|---|---|---|
D-11005 | z/OS | UAGSRV | Fix truncation of a message responsible for reporting secondary Universal Agent status to the Controller. The truncation could cause the Agent to show Active even if it were actually offline. |
D-14191 | Unix | UAGSRV | Fix a possible memory corruption when an application monitored by an Application Control Task is stopped immediately after the application is started. |
D-14197 | Unix | UFTP | Update the libSSH2 3pp vendor library used by UFTP to remediate Critical- and High-severity CVEs. |
D-14409 | z/OS | UAGSRV (UAGRERUN) | Fixes a problem where the JCL for a z/OS task containing a backward reference to a DD statement in the same step prevented that step from being marked "Restartable" in the z/OS task instance. Steps that contain local backward references should be restartable. Steps that contain backward references to other steps in the job will continue to be non-restartable. |
Release 7.8.3.2 - February 10, 2026
Change Id | Platform | Component | Description |
|---|---|---|---|
D-12850 | z/OS | UAGSRV | Upgrade the OpenSSL library that Universal Agent uses to OpenSSL 3.0.18 to resolve outstanding CVEs. |
D-13552 | IBM i | UAGSRV | Ensures that an Agent's configured BUSINESS_SERVICES are part of any HELLO message the Agent sends to the Controller. This change was specifically intended to fix an issue where a transient Linux Agent would lose business service information after temporarily going offline. A persistent Agent on any platform would also benefit from this change if, for example, it were inadvertently deleted from the Controller. |
Release 7.8.3.1 - January 13, 2026
Change Id | Platform | Component | Description |
|---|---|---|---|
D-12850 | IBM i | OMSSRV | Upgrade the OpenSSL library that Universal Agent uses to OpenSSL 3.0.18 to resolve outstanding CVEs. |
Release 7.8.3.0 - December 9, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
B-18732 | Unix (except Solaris) | OMSSRV | Explicitly set and expose the OpenTelemetry schema URL used for traces and metrics exposed by the Universal Agent and Universal Extension tasks. Providing the schema URL with each trace message or metric provides information about the format of the data being exported and details the semantic conventions used by the OpenTelemetry library 3pp vendor library. |
B-22163 | Unix (except Solaris) | OMSSRV | Add support to export traces and metrics in protobuf binary format. Provides the new OTEL_HTTP_TRACE_PROTOCOL and OTEL_HTTP_METRICS_PROTOCOL configuration options to switch between JSON and binary (the default) encoding. info This item was first delivered in the UA 7.9.0.0 release. For the December 2025 maintenance releases, the default encoding for all supported Agent versions (incl., 7.6.1, 7.7.2, and 7.8.3) was changed from JSON to protobuf binary. info Universal Extension tasks using OpenTelemetry features now require Python 3.8 or higher. |
D-13864 | IBM i | UAGSRV | Ensures that an IBM i task will always execute with the credentials specified in the task's definition. If no credentials are specified, the behavior is unchanged and the task will continue to run as the Universal Broker user. |
D-14036 | All (depending on component availability) | UAGSRV | Ensure that an attempt to establish an improper SSL/TLS session over the affected Server application's component interface is handled gracefully. |
D-14051 | All | UAGSRV | Fixes an issue where the UAG Server's configured SERVICE_TIMEOUT value is ignored when receiving messages from OMS. This fix will decrease the time it takes for UAG Server to detect a dropped connection with OMS, which will in turn decrease connection recovery times. |
Release 7.8.2.2 - November 22, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
D-09802 | Unix | UBROKER | When the path to a Universal Broker's info There were code changes made for this defect that are shared between Unix and Windows implementations. However, the Universal Agent for Windows uses TCP/IP for the Universal Broker's component interface. This means that the values saved in the |
D-13947 | z/OS | UAGSRV | Ensure that a z/OS task does not fail with a JCL error when the task's job issues an IEFC677I message. Prior to this change, it may be possible for the Agent to fail with a S0C4 ABEND or return accurate error information to the Universal Controller. |
D-13958 | z/OS | UAGSRV | Prior to the Universal Agent's attempt to calculate a system workload value, ensure that the sample size value in an SMF record type 70-1 (SMF70SAM) is non-zero. This check will prevent a divide-by-zero exception (S0C9). |
Release 7.8.2.1 - October 14, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
D-11976 | Unix | UDM | Update the International Components for Unicode (ICU) 3pp vendor library to remediate Critical- and High-severity CVEs. |
D-12045 | Windows | UAGSRV | Update the Boost 3pp vendor library used for regular expression support on Windows to remediate Critical- and High-severity CVEs. |
D-12235 | Unix | UFTP | Update the libcURL 3pp vendor library (used for UFTP file transfers and UPPS Web API calls) to remediate Critical- and High-severity CVEs. |
D-12923 | Unix | PYTHON | Update the Universal Agent Python distribution to 3.11.13 to remediate Critical- and High-severity CVEs. |
D-13422 | Unix | OMSSRV | Prevent unauthorized access to OMS Server by denying connection attempts from a remote OMS Admin (OMSADMIN) utility. This will restrict OMSADMIN to execution on the OMS Server's system. |
D-13518 | All | UAGSRV | Fixes a regression introduced in Universal Agent 7.8.2.0 that could affect the way string arrays are exchanged between Agent components and with OMS. The affected code is executed on all platforms, but the problem was exposed by a situation specific to z/OS. In that situation, we observed instances where a message sent from a secondary z/OS Agent to a primary z/OS Agent in a sysplex configuration could lose some formatting. The primary content of the message was intact, but the loss of formatting caused an exception to be reported in the Universal Controller log when it received that message from OMS. The most visible result that the task instance had no Restartable Job Steps even though the task itself finished successfully. |
D-13581 | All | UAGSRV | Fixes an issue the prevented UAG Server from retrying all items in the configured OMS_SERVERS list following a lost connection. |
D-13664 | Unix | UAGSRV | Prevents a possible UAG Server crash when an Agent File Monitor task is launched with a variable with no value is specified for the file to be monitored. |
D-13738 | Windows | UAGSRV | Fixes an issue that may cause Agent File Monitor tasks to stop file polling after UAGSRV issues a "No poll threads available" warning. |
D-13908 | Unix | OMSSRV | Fixes an issue introduced by changes delivered in UA 7.8.0.0 with B-20246 that could cause session negotiation to fail when 1) one of the affected Server components receives an unusually large number of session negotiation requests, and/or 2) multiple clients of one of the affected Server components tries to connect and negotiate a session over a very slow network. |
Release 7.8.2.0 - August 12, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
B-21687 | z/OS | UDM | Add the ability to transfer VSAM datasets. The UDM copy command will now accept a VSAM dataset - specified by its cluster or data component name - and transfer its contents to a sequential dataset on z/OS or flat file on a distributed Unix or Windows system. |
D-10535 | Unix | UAGSRV | Prevents an Agent File Monitor task failure when the specified file contains trailing whitespace that is not a space (e.g., a newline control character, '\n'). |
D-12560 | Unix | UFTP | Update the libSSH2 3pp vendor library used by UFTP to remediate Critical- and High-severity CVEs. |
D-13077 | Unix | UFTP | Fixes an issue for transfers to or from an IBM i FTP Server, where UFTP attempts to issue LIB file system commands for a location outside the Library file system. |
D-13550 | Unix (except HP-UX, Solaris) | UEXT | Update the setuptools and certifi Python modules provided for Universal Extension development and installed to |
D-13676 | z/OS | UAGSRV | Prevent an 0C4 abend that could occur in UAGSRV as it evaluates the memory allocated for some JCL SET parameters. |
D-13707 | Unix (except HP-UX) | PYTHON | Decrease the size of the Universal Agent's Python distribution in order to decrease the overall size of the Universal Agent distribution file. |
Release 7.8.1.1 - July 8, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
B-21393 | Windows | All | Certify support for Windows Server 2025. |
D-09780 | Unix | UBROKER | Prevents a Universal Broker crash following successful Manager Fault Tolerant (MFT) recovery of a UCMD Manager task. In this situation, recovery processing was successful. The crash occurred as the Broker cleaned up tracking records stored in its BerkeleyDB database files. |
D-13549 | Windows | UAGSRV | Fixes a problem in which the Universal Agent for Windows process could crash at startup during Universal Extension task initialization. Specifically, the issue occurred within the Agent's Python discovery processing. |
D-13578 | z/OS | UAGSRV | Ensure that the UAG Server's configured CODE_PAGE is honored during OMS message processing. Specifically, this fix addresses a problem with z/OS Task parameter translation when the z/OS system environment is configured to use a codepage other than IBM1047 (UAG Server's default codepage). The problem applies to the following situation:
Prior to this fix, the parameter's name and value would always be translated from UTF8 to IBM1047, even if the UAG Server's configured codepage were set to something other than IBM1047. With this fix, UAG Server will now honor its configured codepage and translate the parameter name and value accordingly. The default is still IBM1047. Note that a similar defect, D-13592, is provided for this release that fixes translation of parameters used for JCL variable substitution. These are parameters whose names start with *@. info Exercise care before doing the SMP/E ACCEPT of this PTF. If any work-arounds exist that rely on a task parameter's name or value always being translated as IBM1047, they will no longer work if the CODE_PAGE option is set in UAGCFG00 to something other than IBM1047. For example, the at symbol ('@') has a UTF8 encoding of 0x0040. Its IBM1047 encoding is 0x7C. Its IBM1141 encoding is 0xB5. Prior to this fix, it the z/OS system's configured codepage were IBM1141, the '@' symbol in a task parameter name or value had to be replaced with a section sign ('§'). This would force the UTF8-to-IBM1047 translation to produce an encoding of 0xB5. When viewing the SET statement that UAG Server adds to the task's JCL, the value would be shown as '@' as expected. With this change, you can now set the CODE_PAGE option in UAGCFG00 to IBM1141 and use the '@' symbol in the task parameter. The work-around described above is no longer needed. If you choose to leave such work-arounds in place, simply make sure the UAG Server's CODE_PAGE option in UAGCFG00 is undefined or set to IBM1047. If all of your task parameter names and values are inserted into the JCL's SET statements correctly today (that is, without any work-arounds), then you do not need to do anything after applying this fix. Everything will continue to work as it does today. |
D-13589 | Unix (Solaris only) | INSTALL | Fixes a problem with Universal Agent upgrades on Solaris that could cause Universal Extension tasks to fail. The failures only occur if the Universal Extension API changed between your installed version and the upgraded version. The fix provided in this maintenance will ensure that existing Universal Extension tasks execute successfully following the upgrade. |
D-13592 | z/OS | UAGSRV | Ensure that the UAG Server's configured CODE_PAGE is honored during OMS message processing. Specifically, this fix addresses a problem with z/OS Task parameter translation when the z/OS system environment is configured to use a codepage other than IBM1047 (UAG Server's default codepage). The problem applies to the following situation:
If your z/OS system's codepage is configured with one of the above codepages, this fix will provide the ability to retain the '@' symbol in the task parameter definition and your z/OS task's JCL. Prior to this fix, the parameter would always be translated from UTF8 to IBM1047, even if the UAG Server's configured codepage were set to something other than IBM1047. With this fix, UAG Server will now honor its configured codepage and translate the '@' symbol correctly. The default is still IBM1047. Note that a similar defect, D-13578, is provided for this release that fixes translation of parameters used for JCL SET statements. info Exercise care before doing the SMP/E ACCEPT of this PTF. If any work-arounds exist in your JCL to replace the '@' variable with a symbol that will match the IBM1047 encoding for '@' AND the CODE_PAGE option is set in your UAGCFG00 to something other than IBM1047, the work-around will no longer work. For example, the at symbol ('@') has a UTF8 encoding of 0x0040. Its IBM1047 encoding is 0x7C. Its IBM1141 encoding is 0xB5. Prior to this fix, it the z/OS system's configured codepage were IBM1141, the '@' symbol could not be used in your JCL. The '@' had to be replaced with a section sign ('§') This would force the UTF8-to-IBM1047 translation to produce an encoding of 0xB5, which allowed UAG Server to find the variables in the JCL and replace them with the values of the task's parameters. With this change, you can now set the CODE_PAGE option in UAGCFG00 to IBM1141 and use the '@' symbol in your JCL (assuming your z/OS system's codepage is IBM1141). The work-around described above is no longer needed. This is true for any of the codepages listed above, provided the configured CODE_PAGE in UAGCFG00 matches the codepage set for your z/OS environment. If you choose to leave such work-arounds in place, simply make sure the UAG Server's CODE_PAGE option in UAGCFG00 is undefined or set to IBM1047. If all of the variables in your z/OS task's JCL start with '@' and are translated correctly today (that is, without any work-arounds), then you do not need to do anything after applying this fix. Everything will continue to work as it does today. |
D-13628 | Windows | UAGSRV | Fixes the behavior for an Agent File Monitor task executed under the following conditions:
Prior to this fix, the file monitor task that satisfies the above criteria would only trigger once. |
Release 7.8.1.0 - June 10, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
B-22083 | IBM i | UAGSRV | Provides a change that removes restrictions on the number of environment variables that can be provided to a Unix or IBM i task. The previous implementation limited the number of environment variables to 2000 on the affected platforms, but Universal Agent will now recognize as many environment variables as the system supports. |
B-22260 | z/OS | UDM | Provide a new dsreserve attribute that can be used to enable global sharing for any dataset opened for input or output. NOTE: Use this attribute with caution. When "yes", all serialization is removed from any dataset that UDM dynamically allocates (for input or output) via the SVC99 routine. This means UDM will be able to access the dataset even if another process has requested exclusive access via DISP=MOD or DISP=OLD. Follow the link for additional details. The default value for this attribute is "no", and it should only be enabled in situations where other applications can serialize or synchronize access to the dataset. |
D-12968 | Windows | UAGSRV | Fixes a memory leak observed when running several Agent File Monitor tasks over an extended period of time. |
D-13442 | z/OS | UAGSRV | Fixes a problem where UAG Server may insert SET statements into existing JCL ahead of an existing EXPORT SYMLIST statements. This change ensures the EXPORT SYMLIST statement will precede SET statements. |
D-13463 | IBM i | UAGSRV | Fixes a problem where a Universal Extension Task that defines a field with a percent sign (%) in its value may be misinterpreted by UAG Server, causing it to crash. |
D-13553 | Unix | UAGSRV | Fixes a problem where a Universal Extension Task will stay in a Running state if the SECURITY option in the Universal Agent configuration file (uags.conf) is set to pam_sessions. |
Release 7.8.0.1 - May 13, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
D-11317 | Unix | UAGSRV | Improves trace file messaging for an Agent File Monitor task that executes on a Linux/Unix Agent. Messages are now consistent with those written for Agent File Monitor tasks that execute on Windows Agents. |
D-12016 | Unix | UCMD | Library dependencies updated due to vulnerabilities. |
D-12785 | All | All | Improve data security by making sure all references to sensitive data are cleared before the memory holding that data is freed. Note that no memory was leaked nor was any sensitive data exposed prior to this change. This change applies to the way in which the Universal Agent applications are built. Some compilers may "skip" a call to clear memory in situations where that that memory is immediately freed in the next statement. This is an undesirable optimization, and this change prevents the call to clear the memory from being skipped. |
D-12805 | Unix | UEM | Fixes a problem where UEM tries to monitor a symbolic link on a Linux system that resides in a world-writeable directory. |
D-13397 | Unix (Linux Intel only) | INSTALL | A Universal Agent install or upgrade on Linux Intel (the RPM or Debian package) would replace file permissions for the This issue only affects users of the Universal Agent for SOA product. |
D-13418 | Unix | UDM | Add support for the rdw session attribute for UDM sessions that execute on Linux/Unix. This change allows users to inform UDM that a file transferred from Linux/Unix to z/OS contains RDW that can either be discarded or retained on a transfer to z/OS. This attribute was previously available on Windows and z/OS only. |
D-13491 | Windows | UAGSRV | Scan Text, Scan Forward, To Size, By Size and By Percentage options for Change Agent File Monitors on Windows are not handled correctly. |
D-13509 | Windows | UAGSRV | Fix Scan Text behavior in Create Agent File Monitor on Windows. |
Release 7.8.0.0 - March 31, 2025
Change Id | Platform | Component | Description |
|---|---|---|---|
B-18389 | Unix | UAGSRV | Add the ability for USAP to collect real-time job-step execution updates and relay the information to the associated task instance in the Controller. This feature provides the USAP configuration options MONITOR_STEPS and PRINT_STEP_REPORT. |
B-20246 | All | UAGSRV | Add the ability to configure and provide the TLS SNI extension in the ClientHello request during the TLS/SSL handshake when connecting to an OMS Server. |
B-20664 | IBMi | UAGSRV | Provide Universal Agent support for the SBMJOB command type added to IBM i tasks. |
B-21193 | IBMi | UAGSRV | Provides support for a configurable UAG Server END SEVERITY option that is applied to tasks launched on the IBM i platform. This may be overridden by the End Severity option on the Controller's IBM i Task form. |
B-21212 | z/OS | UAGSRV | Provide sysplex support for the z/OS External Monitor task. |
B-21229 | Unix (Linux only) | UPPS | Expands Application Fault Tolerant behavior by enhancing the UPPS configuration option, APPL_RETRY_MSG_IDS. The option now provides the ability to select specific message sets and status codes which should cause interrupted Web service calls to be retried. |
B-21232 | Unix (Linux only) | UAGSRV | Provides support for the PAM module type |
B-21382 | Unix (Linux Intel only) | INSTALL | Formalize certification and enhance delivery of Universal Agent OpenShift container deliveries. |
B-21240 | Windows | UAGSRV | Enhance the Agent File Monitor logic to prevent a slow File Monitor instance from impacting or blocking other tasks and/or monitor instances. |
B-21432 | IBMi | INSTALL | Enhance support for IBM i PTF deliveries for Universal Agent maintenance releases. |
B-21530 | z/OS | UAGSRV | Add the ability to detect the failure of jobs that fail before reaching the JES queue in a JES3 environment. |
B-21681 | Windows | INSTALL | Replace an expired Entrust signing certificate with a Sectigo-issued certificate that is used to sign all Windows binaries and packages. |
D-01220 | All | UBROKER | Ensure that the function responsible for removing records from the Universal Event Subsystem (UES) database processes always processes 1000 records with each iteration. Previously, the function always deleted the first 1000 records, causing the removal of subsequent records to be delayed. |
D-06689 | z/OS | UAGSRV | Fixes a situation in which UAG Server could incorrectly interpret instream packed binary data passed via SYSIN to an executing program, causing a z/OS task to fail. |
D-09345 | z/OS | UDM | Improve detection and resolution of conflicts between source and target dataset's dsorg and dsntype allocation attributes. Specifically fixes an issue copying a PDS member to a sequential dataset when only the DSORG=PS attribute is specified. |
D-11405 | z/OS | USAP | Fixes the situation in which a job name longer than 14 characters may result in an error message stating that the variant "exceeds maximum allowed size of 14 bytes". |
D-11743 | z/OS | UAGSRV | Update the UAGRERUN utility to improve detection of changes to base GDG names and to relative and absolute GDG dataset names. This change should fix an issue where UAG may not request confirmation of JCL changes as expected. |
D-12351 | z/OS | UCMSRV | Provide a fix to guarantee unique EMCS names within a sysplex. info This fix to UCMSRV is provided via UCMSPCST. |
D-12474 | All | USAP | Fixed issue where EXTERNAL_STEP or EXTERNAL_COMMAND statements were not allowed to come directly after a temporary variant content statement in a USAP job definition file. |
D-12475 | All | OMSSRV | Fixes a situation in which an attempt to gracefully shutdown the Broker fails, and "Broker is not responding" errors are issued. On some occasions when this error occurs, server components may continue to run and consume 100% CPU after the Broker is killed. |
D-12595 | IBMi | UAGSRV | Corrects the display of CPU information for IBM i Agents in the Universal Controller. |
D-12596 | IBMi | UAGSRV | Report the number of licensed IBM i Agents using "IBMI" instead of "AS400" in the Universal Agent and Broker logs. |
D-12641 | z/OS | UAGSRV | Ensure JCL SET statements are written to the JCL immediately following the JOB card and any JCL comments that directly follow the JOB card. |
D-12826 | All | UAGSRV | Fixes a situation in which UAG Server may not receive OMS messages, causing submitted tasks to stay in a Queued state, although the Universal Agent is still successfully sending heartbeat messages to the Controller. |
D-12831 | IBMi | UAGSRV | Prevents a Start Failure for extension tasks when the name of a Python interpreter specified in the EXTENSION_PYTHON_LIST contains a space. |
D-12841 | z/OS | UDM | Allow multiple sessions to be created from a single UDM script when SystemSSL is used. |
D-12863 | z/OS | UAGSRV | Ensure that JCL errors encountered when a z/OS task is rerun do not allow the task to finish with a status of SUCCESS. |
D-12913 | Unix | UEXT | Fixes a situation in which a Universal Extension Task fails to reconnect to a Universal Agent following an Agent restart. |
D-12938 | Unix | UAGSRV | Fixes a problem where an Agent File Monitor task fails to detect files larger than 20 GB when a minimum file size is specified. |
D-12946 | Unix | OMSSRV | Fixes a problem in which force finishing an Agent task may result in subsequent tasks to stay in Queued state. |
D-12991 | IBMi | INSTALL | Updated the UCHGRLS program to all tagging and un-tagging for Universal Agent version 5.1.1. |
D-13034 | Unix (except HP-UX) | UEXT | Ensure that binaries bundled with an extension (using the zip_safe=false option) retain the necessary execute permissions when unbundled by the Agent. |
D-13043 | z/OS | UAGSRV | Ensure that a z/OS Agent Change File Monitor task correctly detects file (or dataset) creation on a Secondary agent when "Trigger on Create" is set in the file monitor task. |
D-13056 | Windows | UAGSRV | Fixes a regression introduced in Universal Agent 7.5.0.0, which causes Windows task execution to fail if the "Interact with Desktop" is selected from the task form. |
D-13071 | IBMi | USMBJOB | Ensure that USMBMJOB can handle multiple libraries in the INLIBL option. |
D-13106 | Unix | UCMSRV | Fixes a problem where a UCMD Server or UDM Server could crash upon startup when using PAM sessions. |
D-13120 | Windows | UDM | Fix broken UTF-8 support in UDM for Windows 2016 and below. |
D-13128 | Unix (except HP-UX) | UEXT | Eliminates the "Exception while exporting metrics..." message that appears in a Universal Extension task's stderr when OTEL_EXPORT_METRICS is disabled. By design, no metrics should be exported when OTEL_EXPORT_METRICS is set to NO. |
D-13141 | z/OS | UDM | Provides a new z/OS-specific UDM script attribute "lbi" to enable or disable the Large Block Interface (LBI) for transfers to prevent the corruption of datasets with RECFM=U. Previously, LBI support was enabled for all transfers, but this caused records shorter than the dataset's block size to be padded with 0x0 characters, which corrupted the output dataset. This change disables LBI by default, and makes it possible to re-enable it with lbi=yes. |
D-13148 | All | OMSSRV | Fix an issue that prevented OMS Server from honoring configuration values specified via the environment variables that OMS provides. This fix was made to improve configurability for OMS Servers executing inside a container environment. |
D-13177 | Unix | USAP | Fixes an issue that caused USAP XBP 2.0 API calls to fail when the MAX_XBP configuration option was set to 2.0 and only XBP 2.0 was available on the SAP system. |
D-13209 | z/OS | UDM | Fixes a problem that prevented UDM from correctly obtaining allocation attributes for an input GDG dataset specified using a relative name (i.e., with the generation number in parentheses). That information is now available as the default allocation attributes for the target dataset. |